2.7.1 Alarm Message
When the menu key
(1) Alarm
(2) Stop code
(3) Alarm message
(4) Operator message
Refer to the Appendix. List of Alarms for
details on the alarms.
When an alarm occurs, the class code will
display on all screens.
Downloaded from
ManualsNet.com
2. Screen Operation of A985GOT
ALARM
The code and number or message relating to an operation alarm, program error, MCP alarm,
servo alarm, or system error are displayed.
The automatic operation disable state or stop state in automatic operation mode is displayed in
code and error number.
The alarm messages specified by the
user PLC (built-in) are displayed.
The operator messages specified by the
user PLC (built-in) are displayed.
search engine
2.7 Diagnosis
is pressed, the ALARM/DIAGN screen is displayed.
I - 180