To Change A Numerical Parameter - Mitsubishi Electric MELDAS C6 Instruction Manual

3.7.1.4 To Change a Numerical Parameter

1)
2)
3)
4)
5)
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.7 Realtime Wave Screen (For only the panel computer)
Press Setting menu to display the
setting screen.
Click "Offset" of CH1.
Then the clicked item will be reversed.
Press button twice.
The 3rd figure of CH1 Offset data will
be reversed.
Press button five times.
The value of the 3rd figure of CH1
Offset will increase by 5.
Press Setting menu again.
Parameter setting completes and
normal screen will be recovered.
search engine
SpeedFB
SpeedFB
I - 299