Mitsubishi Electric MELDAS C6 Instruction Manual page 150

(2) When program number does not exist on the external memory
Set the data type and program
number.
(Example)
To register the program with
O1000
# ( 1 ) DATA ( 1 0 0 0 )
Press the
1) Data input is started.
2) The program is registered in
3) When normal data input is
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Specify machining program data type #1 and the program number to be registered.
key.
INPUT
memory with the specified
program number.
executed to the end and the
EOR code is read, data input is
terminated.
search engine
2.6 Data In/Out
I - 135