Mitsubishi Electric MELDAS C6 Instruction Manual page 229

• Restoring the absolute position
After the procedure in "Writing auxiliary axis parameters to MR-J2-CT" is finished, restore the
absolute position in the new amplifier.
The following describes the procedure for restoring the absolute position.
Input "(3) (a)" from the BACKUP screen. (a: axis No. (1 to number of connected axes))
After inputting, the message "CONTINUE Y/N" will appear for confirmation of the data backup.
The absolute position is restored only if "(Y)" is input.
The message "ABS POS RESTORED" will appear when the absolute position restoration
operation is finished.
If MR-J2-CT is not connected, the message "E01 SETTING ERROR" will occur, and the
absolute position will not be restored.
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
[BACK UP]
AUX-PARA
#1 MR-J2-CT ->
#2 SRAM
ABS POS.
#3 ABS POS RESTORE
#(3) (1) (Y)
AUX-PRM
search engine
2.7 Diagnosis
ALARM/DIAGN 9.11/11
SRAM
-> MR-J2-CT
ABS POS RESTORED
AUX-MON
I - 214
MENU