Absolute Position Initialization - Mitsubishi Electric MELDAS C6 Instruction Manual

2.7.5.2 Absolute Position Initialization

Pressing the menu key
key is pressed on that screen, the ABS POSITION SET screen will display. This screen is used to set
the parameter data used to establish the zero point and to display the initialization.
Display item
TYPE
STATE
TO END
MACHINE
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
ABS-SRV
The position detection system selected by the absolute position
parameter is displayed.
INC.
DOG
STOPPER
NO STOPPER
The progress of initialization is displayed, such as "OK" if the absolute
position has been established or "NG" if the absolute position is lost.
The distance between the machine basic position and the first grid point
is displayed.
If the first grid point is covered by the grid mask, the distance to
the next grid point is displayed.
"NOT PASS" is displayed until the machine passes a grid point after
power on. After the machine passes the grid, the current machine
position is displayed.
search engine
2.7 Diagnosis
displays the ABS SERVO MONITOR screen. When the
Explanation
: Incremental system
: Dog type absolute position detection
: Dogless absolute position detection machine end
stopper method
: Dogless absolute position detection origin point
alignment method
I - 202
CONFIG
"TO END"
"TO END"
NEXT