Graphics; Outline Of Functions - Mitsubishi Electric MELDAS C6 Instruction Manual

2.8 Graphics

2.8.1 Outline of Functions

The GRAPHIC screen will appear when the function selection key
Machine tool operations can be monitored, and the machining program path can be illustrated on
the GRAPHIC screen. This is useful for inspecting the program.
(1) Trace function
(2) Program check function
(Note 1) The graphic function is an optional function that is available only when the NC-dedicated
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
The trace function illustrates the actual machine movement path and draws the machine motion
itself. The machine operation can be monitored during machining.
The program check function illustrates the machining program movement path and draws the
operation results in the NC without carrying out automatic operation.
Thus, it can draw accurate figures at high speed, allowing the machining program to be
checked.
display unit CT100 is used.
The GRAPHIC screen will not be displayed if this specification is not added.
search engine
2.8 Graphics
I - 223
is pressed.
SFG