Menu Function - Mitsubishi Electric MELDAS C6 Instruction Manual

2.8.2 Menu Function

The menu configuration in the GRAPHIC screen is shown below. These are operation menus for
selecting operations on the GRAPHIC screen. Select the menus by pressing the corresponding
menu key. If the required operation menu does not appear, press the
menu will appear.
List of functions
TRACE
PROGRAM
ERASE
CHECK
STEP
SEARCH
SCALE
STANDARD
GRF MODE
ROTATION
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Menu
This function is used when carrying out trace display.
The machining program can be displayed on the screen during drawing with
this function.
This function erases the graphics shown on the GRAPHIC screen.
This function is used to continuously check the machining program.
This function is used to check machining programs one block at a time.
Commands G27 to G30, G60, fixed cycle and corner R/C are divided into
several blocks.
The program to be checked can be set (called) with this function.
This function changes the figure scale and display position. Portions of the
figure can be enlarged and drawn.
This function automatically changes the display center and figure scale in
the machine stroke length range.
1-plane display
Any of the above can be set for a random axis.
In the 3-dimensional display mode, a drawing of a solid object can be made
looking at the object from any direction, not just the front. (M system only)
search engine
2.8 Graphics
TRACE PROGRAM
CHECK STEP SEARCH
SCALE STANDARD GRF MODE ROTATION
Function
2-plane display
(M system only)
I - 224
MENU
key. The next
ERASE MENU
ERASE MENU
MENU
3-dimensional display
(M system only)