Table of Contents
Advertisement
B: INSTALLATION
1. H4 MODEL
1) Install the oil pump to bracket.
(1) Place the oil pump bracket in a vise. Tighten
the bushing using a 12.7 mm (1/2") type 14- and
21-mm box wrench until it is in contact with oil
pump mounting surface.
CAUTION:
When securing the oil pump bracket in a vise,
hold the oil pump bracket with the least possi-
ble force between two wood pieces.
(1) Bushing
(2) Nut
(3) 21 mm
(4) 14 mm
(5) Bolt
(2) Tighten the bolt which holds the oil pump to
bracket.
Tightening torque:
⋅
15.7 N
m (1.6 kgf-m, 11.6 ft-lb)
Oil Pump
POWER ASSISTED SYSTEM (POWER STEERING)
Tightening torque:
37.3 N
2) Tighten the bolts which hold the power steering
pump bracket.
Tightening torque:
<Ref. to PS-9, OIL PUMP, COMPONENT, Gen-
eral Description.>
PS-00135
3) Interconnect the pressure hose and suction
hose.
Tightening torque:
Eye bolt
CAUTION:
If a hose is twisted at this step, take care the
hose may come into contact with some other
parts.
• Non-turbo model
PS-00128
PS-83
⋅
m (3.8 kgf-m, 27.5 ft-lb)
⋅
39 N
m (4.0 kgf-m, 28.9 ft-lb)
(1)
(2)
(1) Suction hose
(2) Pressure hose
PS-00137
PS-00188
PS-00688
Advertisement
Chapters
Table of Contents
