Subaru Legacy 2005 Service Manual page 3378

POWER ASSISTED SYSTEM (POWER STEERING)
12) Install the valve to pinion, and install the snap
ring.
(1) Snap ring
(2) Valve
13) Install the pinion & valve assembly into valve
housing.
(1)
(1) Valve housing
(2) Pinion & valve ASSY
14) Using a press, push the outer race of bearing
and press-fit the pinion & valve assembly into hous-
ing.
(1) Pinion & valve ASSY
(2) Bearing
(3) Housing
15) Apply the specified grease to dust cover.
Steering Gearbox [LHD Model]
(2)
(1)
PS-00531
(2)
PS-00532
(1)
(2)
(3)
PS-00533
16) Install the dust cover on valve assembly.
CAUTION:
Be sure to install the dust cover to groove of
shaft.
(1) Dust cover
(2) Groove
17) Apply genuine grease to the pinion gear and
bearing of valve assembly.
18) Install new O-ring to valve assembly.
(1)
(1) O-ring
PS-40
(1)
(2)
PS-00534
PS-00165
PS-00535