Table of Contents
Advertisement
POWER ASSISTED SYSTEM (POWER STEERING)
• H6 model
T1
T3
T3
(1)
Oil pump
(2)
Pulley
(3)
Bracket
(4)
Belt tensioner
C: CAUTION
• Wear work clothing, including a cap, protective
goggles and protective shoes during operation.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Be careful not to burn yourself, because each
part on the vehicle is hot after running.
• Use SUBARU genuine power steering fluid,
grease etc. or the equivalent.Do not mix fluid,
grease etc. with that of another grade or from other
manufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before securing a part on a vise, place cushion-
ing material such as wooden blocks, aluminum
plate or cloth between the part and the vise.
General Description
T2
(3)
(4)
T3
PS-10
(1)
(2)
⋅
Tightening torque: N
m (kgf-m, ft-lb)
T1: 15.7 (1.6, 11.6)
T2: 25 (2.5, 18.4)
T3: 33 (3.4, 24.3)
T4: 37.3 (3.8, 27.5)
T4
PS-00699
Advertisement
Chapters
Table of Contents
