Table of Contents
Advertisement
29) Bend the lock washer and caulk it.
CAUTION:
Be careful not to scratch the rack when caulk-
ing lock washer.
(1) Lock washer
30) Apply a coat of grease to the tie-rod groove,
and then install the boot to housing.
CAUTION:
Right side boot has groove for identification, be
sure to install the right and left of boot.
(1)
(1) Right side boot
(2) Groove for identification
Steering Gearbox [LHD Model]
PS-00093
(2)
PS-00524
PS-37
POWER ASSISTED SYSTEM (POWER STEERING)
NOTE:
Make sure that the boot is installed without unusual
inflation or deflation.
31) Install a new boot band. Using band clamp pli-
ers, caulk it so that the clearance of caulking por-
tion becomes 2 mm (0.079 in) or less.
(A)
(A) Boot band
(B) 2 mm (0.079 in) or less
32) Fix the boot end with clip (small).
(1) Clip
PS-00194
(B)
PS-00499
(1)
PS-00661
Advertisement
Chapters
Table of Contents
