Table of Contents
Advertisement
F: ADJUSTMENT
1) Adjust the front toe.
<Ref. to FS-11, FRONT WHEEL TOE-IN, INSPEC-
TION, Wheel Alignment.>
Standard of front toe:
IN 3 — OUT 3 mm (IN 0.12 — OUT 0.12 in)
(1) Lock nut
2) Adjust the steering angle of wheels.
Specification of steering angle:
2.0 GT,
Model
2.0 i, 2.5 i
3.0 R
Inner
37.3°±1.5°
37.2°±1.5°
wheel
Outer
33.0°±1.5°
32.9°±1.5°
wheel
3) If the steering wheel spokes are not horizontal
when wheels are set in the straight ahead position,
or error is more than 5° on the periphery of steering
wheel, correctly re-install the steering wheel.
(1)
(1) 5° or less
4) If the steering wheel spokes are not horizontal
with vehicle set in the straight ahead position after
this adjustment, correct it by turning the right and
left tie-rods in the opposite direction each other by
the same angle.
Steering Gearbox [RHD Model]
PS-00107
3.0 R
OUTBACK
spec. B
37.1°±1.5°
37.8°±1.5°
32.8°±1.5°
33.5°±1.5°
PS-00513
PS-65
POWER ASSISTED SYSTEM (POWER STEERING)
Advertisement
Chapters
Table of Contents
