Table of Contents
Advertisement
POWER ASSISTED SYSTEM (POWER STEERING)
11) Disconnect the return hose and pressure hose
from gearbox.
(1)
(1) Return hose
(2) Pressure hose
12) Remove the clamp bolts securing gearbox to
the crossmember, and remove the clamp.
(1) Clamp
Steering Gearbox [RHD Model]
(2)
PS-00536
(1)
PS-00448
13) Remove the bolts which secure gearbox brack-
et, and remove the bracket and gearbox.
(1) Bracket
B: INSTALLATION
1) Insert the gearbox into crossmember, being
careful not to damage gearbox boot.
2) Install the gearbox and bracket. Tighten the bolt
temporarily.
(1) Bracket
3) Tighten the gearbox to the crossmember bracket
via clamp with bolt temporarily.
(1) Clamp
4) Tighten the bolts which temporary tightening the
clamp and bracket of gearbox to specified torque.
Tightening torque:
⋅
60 N
m (6.1 kgf-m, 44.1 ft-lb)
PS-48
(1)
(1)
(1)
PS-00449
PS-00449
PS-00448
Advertisement
Chapters
Table of Contents
