Subaru Legacy 2005 Service Manual page 3326

BRAKE
D: ADJUSTMENT
Loosen the lock nut, and adjust the stop light switch
position until the clearance between the threaded
end of the stop light switch and stopper (A) be-
comes 0.3 mm (0.012 in). Then, tighten the lock
nut.
Tightening torque:
⋅
8 N m (0.8 kgf-m, 5.8 ft-lb)
(1) Stop light switch
(2) Lock nut A
(3) Lock nut B
(4) Stopper
(5) Brake pedal
NOTE:
Tighten the lock nut B until the clearance between
the threaded end of stop light switch and stopper
becomes 0 mm (0 inch). Hold the stop light switch
to prevent turning, and then loosen the lock nut B
approx. 60°. The clearance (A) becomes 0.3 mm
(0.012 in).
Stop Light Switch
(1)
(2)
(3)
A
(4)
(5)
BR-00111
BR-46