Subaru Legacy 2005 Service Manual page 3414

POWER ASSISTED SYSTEM (POWER STEERING)
3) Connect the suction hose and return hose to res-
ervoir tank. Install the oil cooler to oil cooler brack-
et.
CAUTION:
Firmly insert the resin clip of return hose to
bracket.
• H4 turbo model
(4)
(3)
(5)
(1)
(2)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(4) Oil cooler
(5) Oil cooler bracket
• H4 non-turbo model
(3)
(1)
(2)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
Pipe Assembly [RHD Model]
• H6 model
PS-00482
4) Connect the suction hose and pressure hose to
oil pump. Tighten the eye bolt of pressure hose.
Tightening torque:
• Non-turbo model
PS-00697
PS-76
(1)
(4)
(1) Reservoir tank
(2) Suction hose
(3) Return hose
(4) Oil cooler pipe
(5) Oil cooler
⋅
39 N m (4.0 kgf-m, 28.9 ft-lb)
(1)
(2)
(1) Suction hose
(2) Pressure hose
(3)
(2)
(5)
PS-00623
PS-00688