POWER ASSISTED SYSTEM (POWER STEERING)
6) Remove the two bolts securing valve assembly.
7) Carefully draw out the input shaft and remove
the valve assembly.
8) Put a vinyl tape around the spline portion, and
slide the dust cover to remove.
(1)
(1) Dust cover
Steering Gearbox [LHD Model]
PS-00116
PS-00143
PS-00144
PS-32
9) Using a press remove the pinion & valve assem-
bly from valve housing.
(1)
(2)
(3)
(1) Pinion & valve ASSY
(2) Valve housing
(3) Cloth
10) Using the ST and a press, remove the bushing
and oil seal from the valve housing.
ST 34199AG090 INSTALLER & REMOVER
CAUTION:
• Do not apply a force to the end surface of
valve housing.
• Do not reuse oil seal after removal.
(1) Oil seal
(2) Bushing
PS-00149
ST
(1)
(2)
PS-00150