Subaru Legacy 2005 Service Manual page 3282

BRAKE
1. General Description
A: SPECIFICATION
Model
Size
Type
Effective disc diameter
Disc thickness × Outer
Front disc diameter
brake
Effective cylinder diameter
Pad dimensions
(length × width × thick-
ness)
Clearance adjustment
Size
Type
Effective disc diameter
Disc thickness × Outer
Rear disc diameter
brake
Effective cylinder
diameter
Pad dimensions
(length × width × thick-
ness)
Clearance adjustment
Type
Effective diameter
Master
Reservoir type
cylinder
Brake fluid reservoir
capacity
Type
Brake
booster
Effective diameter
Brake line
Brake fluid
CAUTION:
• Avoid mixing brake fluid of different
brands to prevent fluid performance from
degrading.
• When filling brake fluid, be careful not to
allow any dust into the reservoir.
• Use fresh brake fluid when replacing or
refilling fluid.
NOTE:
Refer to "PB" section for parking brake specifications. <Ref. to PB-2, SPECIFICATION, General Descrip-
tion.>
General Description
2.0 i, 2.5 i
15-inch type
mm (in) 228 (8.98)
24 × 277 (0.94 × 10.91)
mm (in)
117.8 × 50.5 × 11.0 (4.638 × 1.988 × 0.433)
mm (in)
Disc (Floating type, solid)
mm (in)
10 × 274 (0.39 × 10.79)
mm (in)
mm (in)
92.0 × 33.0 × 9.0 (3.622 × 1.299 × 0.354)
mm (in)
mm (in)
3
cm (cu
in)
mm (in)
BR-2
3.0 R (EH model), OUT-
BACK 2.5 i, OUTBACK
3.0 R
16-inch type
Disc (Floating type, ventilated)
244 (9.61)
24 × 294 (0.94 × 11.57)
42.8 (1.685) × 2
Automatic adjustment
15-inch type
238 (9.37)
38.1 (1.500)
Automatic adjustment
Tandem
23.8 (15/16)
Sealed type
205 (12.51)
Vacuum suspended
208 + 229 (8.19 + 9.02)
Dual circuit system
FMVSS No. 116, DOT3
2.0 GT, 3.0 R (Except for
EH model)
17-inch type
261 (10.28)
30 × 316 (1.18 × 12.44)
130.0 × 53.5 × 11.0
(5.118 × 2.106 × 0.433)
Disc (Floating type, venti-
lated)
254 (10.0)
18 × 290 (0.71 × 11.42)
82.4 × 33.7 × 9.0
(3.244 × 1.327 × 0.354)