Show Ip Dns Cache; Show Ip Dns Name-Server - Siemens SCALANCE W770 Series Configuration Manuals

Network protocols
8.1 IPv4 protocol
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ip dns
Result
Information on the DNS client is displayed.
8.1.1.6

show ip dns cache

Description
This command shows the content of the DNS cache. The DNS cache buffers replies of the
DNS server for a brief time. This allows other queries for the same name to be replied to directly
without sending another query to the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ip dns cache
Result
The content of the DNS cache is displayed.
8.1.1.7

show ip dns name-server

Description
This command shows information about the DNS servers configured on the device. The table
contains the index, the address type (e.g. IPv4) as well as the IP address and the origin.
344
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08