Vap Communication With Other-Vaps (Access Point) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

vap communication with other-vaps (access point)

With this command, you specify that clients logged on to different SSIDs of an access point

can communicate with each other.

This command is available only in access point mode.

You are in the Interface Configuration mode of the VAP interface.

The command prompt is as follows:

cli (config-if-vapX-0-Y)#

Call the command without parameter assignment:

vap communication with other-vaps

The communication option via different SSIDs of an access point is enabled.

Further notes

You display the settings with the show wlan security <vapX 0/Y> command.

You disable the function with the no vap communication with other-vaps command.

Table of Contents