No Ipv6 Default Route - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network protocols

8.2 IPv6 protocol

[<administrative distance>] [unicast]

Number of bits belonging to the prefix

(from left to right)

IPv6 address of the gateway to which the IPv6 packets will be forwar‐

Keyword for a VLAN connection

Number of the addressed VLAN

Value for the administrative distance

administrativ

Addressing mode unicast

Type or speed of the interface

Module no. and port no. of the interface

interface-id

For information on names of addresses and interfaces, refer to the section "Interface identifiers

and addresses (Page 29)".

The entry is configured.

Further notes

You delete a static entry from the IPv6 routing table with the no ipv6 route command.

You display the IPv6 routing table with the show ipv6 route command.

no ipv6 default route

With this command, you delete the IPv6 default route.

You are in the Global configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameters:

no ipv6 default route <prefix len>

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Range of values / note

1 ... 128 bits

Enter a valid IPv6 address.

Enter a valid interface.

Show Quick Links

Table of Contents