Configuration
4.1 System
The parameter has the following meaning:
Parameter
location name
Result
The location information is created in the system.
4.1.10.12
system name
Description
This command, you enter a name for the system.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
system name <system name>
The parameter has the following meaning:
Parameter
system name
Result
The name is created in the system.
4.1.11
Commands in the Interface configuration mode
This section describes commands that you can call up in the interface configuration mode.
Depending on the Interface selected, various command sets are available.
In the Global configuration mode, enter the interface command to change to this mode.
74
Description
Input box for the location information
Description
Input box for the name
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Range of values / note
max. 255 characters
Range of values / note
max. 255 characters
Configuration Manual, 09/2017, C79000-G8976-C324-08