Show Interfaces - Siemens SCALANCE W770 Series Configuration Manuals

Configuration
4.1 System
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show im
Result
The information is displayed.
4.1.1.6

show interfaces

Description
This command shows the status and the configuration of one, several or all interfaces.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show interfaces
The parameters have the following meaning:
Parameter
interface-
type
interface-id
description
status
52
[{
[<interface-type><interface-id>]
[{description|status}]
|
{vlan<vlan-id(1-4094)>}
}]
Description
Type or speed of the interface
Module no. and port no. of the interface
Shows the description of the interface
Shows the status of the interface
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Range of values / note
Enter a valid interface.
-
-