Siemens SCALANCE W770 Series Configuration Manuals page 236

Network structures
7.1 WLAN
The parameters have the following meaning:
Parameters
show-rates
add
del
rate
all
none
basic
Note
You need to assign at least one data transmission speed and one "Basic" to the WLAN
interface.
Result
The data transmission speeds are assigned to the WLAN interface.
Further notes
You display the setting with the show wlan data rates command.
You enable the function with the wlan data rates-11abg selected only command.
You configure the transmission standard with the wlan mode command.
You can reset the selection to the default setting with the wlan data rate-11abg
defaults command.
236
Description
Shows a list of the available data transmission speeds.
The data transmission speed is assigned to the WLAN interface entered
in the <rate> parameter.
The data transmission speed is removed from the WLAN interface en‐
tered in the <rate> parameter.
Data transmission speed
All available data transmission speeds are assigned to the WLAN inter‐
face.
Only the first available data transmission speed is assigned to the WLAN
interface. The other data transmission rates are deselected.
The data transmission speed entered in the <rate> parameter is de‐
clared as "Basic".
The "basic" parameter can only be called in conjunction with the param‐
eters "add", "del", "all" and "none".
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08