No Snmp Community Index - Siemens SCALANCE W770 Series Configuration Manuals

Network protocols
8.6 SNMP
snmp community index <CommunityIndex> name <CommunityName>
The parameters have the following meaning:
Parameter
CommunityIndex
name
CommunityName
security
SecurityName
context
Name
Storage type
If optional parameters are not specified when configuring a community, the default values
apply.
Note
Community string
For security reasons, do not use the standard values "public" or "private". Change the
community strings following the initial installation.
The recommended minimum length for community strings is 6 characters.
Result
The settings are configured.
Further notes
You delete the details of an SNMP community with the no snmp community index
command.
You show the details of an SNMP community with the show snmp community command.
You show the status information of the SNMP communication with the show snmp command.
8.6.2.7

no snmp community index

Description
With this command, you delete the details of an SNMP community.
418
security <SecurityName> [context <Name>][{volatile|nonvolatile}]
Description
Index of the community
Keyword for the name of the community -
Name of the community
Keyword for the security name
Security name
Keyword for the context name
Context name
Specifies whether the settings remain
following a restart.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Range of values / note
max. 32 characters
max. 32 characters
-
max. 32 characters
-
max. 32 characters
● :
The settings are lost after a
restart
● :
The settings are retained after
a restart