No Snmp Filterprofile - Siemens SCALANCE W770 Series Configuration Manuals

Network protocols
8.6 SNMP
Result
The filter is created.
Further notes
You delete a filter with the no snmp filterprofile command.
You display the created filter with the show snmp filter table command.
8.6.2.11

no snmp filterprofile

Description
With this command, you delete a filter.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp filterprofile <profilename><OIDTree>
The parameters have the following meaning:
Parameters
profilename
OIDTree
Result
The filter is deleted.
Further notes
You create a filter with the snmp filterprofile command.
You display the created filter with the show snmp filter table command.
422
Description
Name of the filter profile
Object ID
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Range of values / note
max. 32 characters
Path information of the MIB tree