No Radius-Server - Siemens SCALANCE W770 Series Configuration Manuals

Parameter
-
key
secret-key-string
primary
login
dot1x
login-dot1x
test
For information on addresses and interfaces, refer to the section "Addresses and interface
names (Page 29)".
If optional parameters are not specified when configuring, the default values apply.
Note
Primary server
In a network, only one RADIUS server can be selected as the primary server.
If you select a RADIUS server as the primary server, this replaces the server that previously
had the role of primary server.
Further notes
You store a domain name with the ip domain name or domain name command.
11.2.2.5

no radius-server

Description
With this command, you delete a RADIUS server entry on the RADIUS client.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Enter the maximum number of retries
for an attempted query.
The initial connection attempt is repea‐
ted the number of times specified here
before another configured RADIUS
server is queried or the login counts as
having failed.
Keyword for the key for communication
between the authenticator and the serv‐
er
Value for the key
Identifies the RADIUS server as primary
server
The server is used only for the login au‐
thentication.
The server is used only for the 802.1X
authentication.
The server is used for both authentica‐
tion procedures.
Tests whether or not the specified RA‐
DIUS server is available. At the same
time you can create a new RADIUS
server and run the test.
Security and authentication
11.2 RADIUS client
Range of values / note
1 ... 5
Default: 3 (retries, this means 4
connection attempts)
-
128 characters
Default: "default"
-
-
-
Default setting
-
493