Siemens SCALANCE W770 Series Configuration Manuals page 325

cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
spanning-tree {cost <0-200000000>|disable|
The parameters have the following meaning:
Parameter
cost
disable
link-type
portfast
port-priority
Note
Configure multiple properties
With each call of the command, you can configure precisely one property.
If you want to configure several properties, call the command several times.
Result
The selected property is configured.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
link-type{point-to-point|shared}|portfast|
port-priority<0-240>}
Description
Keyword
Describes the costs of the port for cal‐
culating the lowest cost path.
disables the interface for spanning tree -
Connection status of the following net‐
work segment
Enables the PortFast function
Priority of the interface
Network structures
7.3 Spanning Tree
Range of values / note
0 ... 200000000
Default:
if dynamic calculation of the path
costs is not enabled:
● 200000 for physical interfaces
● 199999 for port channels
Default:
The spanning tree function is ena‐
bled on the interface
● point-to-point
● shared
Default:
● point-to-point
The connection is configured
as full-duplex
● shared
in all other cases
-
Default: disabled
0 ... 240 in steps of 16
Default: 128
325