Vap Security Wpa-Group-Key-Update-Interval (Access Point) - Siemens SCALANCE W770 Series Configuration Manuals

11.3.5.6

vap security wpa-group-key-update-interval (Access Point)

Description
With this command you specify the time after which the key is renewed.
Note
This command is available only in access point mode.
Requirement
You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows:
cli (config-if-vapX-0-Y)#
Syntax
Call up the command with the following parameters:
vap security wpa-group-key-update-interval {0|seconds (30-36000)}
The parameter has the following meaning:
Parameter
0
seconds
Result
The time for renewal of the key is specified.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
The key will not be renewed.
When the time expires (second),
the key is renewed.
Security and authentication
11.3 WLAN
Range of values / note
-
30 ... 36000
531