Snmp Filterprofile - Siemens SCALANCE W770 Series Configuration Manuals

8.6.2.10

snmp filterprofile

Description
With this command, you configure a filter that describes the access rights to the MIB tree.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp filterprofile <profile-name> <OIDTree> [mask<OIDMask>]
The parameters have the following meaning:
Parameter
profile-
name
OIDTree
mask
OIDMask
-
-
Note that the meaning of the filter mask changes depending on the "included/excluded"
parameter:
● ...0... and "included" means: Access denied
● ...0... and "excluded" means: Access permitted
● ...1... and "included" means: Access permitted
● ...1... and "excluded" means: Access denied
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
{included|excluded}[{volatile|nonvolatile}]
Description
Name of the filter profile
Object ID
Keyword for the OID mask
Mask that filters access to the elements of
the MIB tree
Specifies whether the filtered elements are
used or excluded
specifies whether the settings remain follow‐
ing a restart:
Network protocols
Range of values / note
max. 32 characters
Path information of the MIB tree
-
A series of "0" and "1" separated by dots
in keeping with the path information of
the MIB tree
● included
● excluded
● volatile (volatile):
The default settings are used after a
restart
● nonvolatile (non-volatile):
The saved settings are used after a
restart
8.6 SNMP
421