Ssh-Server; No Ssh-Server - Siemens SCALANCE W770 Series Configuration Manuals

Network protocols
8.11 SSH server
You exit the Global configuration mode with the end or exit command and are then in the
Privileged EXEC mode again.
8.11.2.1

ssh-server

Description
With this command, you enable the SSH protocol on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
ssh-server
As default the function is "enabled".
Result
The SSH protocol is enabled on the device.
Further notes
You disable the SSH protocol with the no ssh-server command.
8.11.2.2

no ssh-server

Description
With this command, you disable the SSH protocol on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
448
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08