Siemens SCALANCE W770 Series Configuration Manuals page 21

Further documentation
The "SIMATIC NET Industrial Ethernet Network Manual" contains information on other
SIMATIC NET products that you can operate along with the SCALANCE W700 devices of this
product line in an Industrial Ethernet network. There, you will find among other things optical
performance data of the communication partners that you require for the installation.
The "SIMATIC NET Industrial Ethernet Network Manual" can be found on the Internet pages
of Siemens Industry Online Support under the following entry ID:
27069465 (http://support.automation.siemens.com/WW/view/en/27069465)
Terms used
The designation . . .
IPv4 address
IPv6 address
IP address
IPv4 interface
IPv6 interface
IP interface
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions constitute one element of such a concept.
Siemens' products and solutions only form one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. firewalls and/or network segmentation) are
in place.
Additionally, Siemens' guidance on appropriate security measures should be taken into
account. For additional information on industrial security measures that may be implemented,
please visit
Link (https://www.siemens.com/industrialsecurity)
Siemens' products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends that product updates are applied as soon as they are available
and that the latest product versions are used. Use of product versions that are no longer
supported, and failure to apply the latest updates may increase customer's exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
Link (https://www.siemens.com/industrialsecurity).
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
1.1 Information on the Configuration Manual
stands for . . .
IPv4 address
IPv6 address
IPv4/IPv6 address
Interface that supports IPv4.
Interface that supports IPv6. The interface can have more than one IPv6
address The IPv6 addresses have different ranges (scope), e.g. link local
Interface that supports both IPv4 and IPv6. As default the IPv4 support
is already activated. The IPv6 support needs to be activated extra.
Introduction
21