Add Log; Client Config - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

12.1 Diagnostics

Commands relating to other topics that can be called in the Global configuration mode can be

found in the relevant sections.

● If you exit the EVENTS configuration mode with the exit command, you return to the

Global configuration mode.

● If you exit the EVENTS configuration mode with the end command, you return to the

Privileged EXEC mode.

add log

With this command, you create an entry in the log.

You are in the EVENTS Configuration mode.

The command prompt is as follows:

cli(config-events)#

Call the command without parameters:

add log <log-entry>

The parameter has the following meaning:

The entry has been made in the logbook.

With this command, you enable one of the clients that processes or forwards the messages

of the device.

The following clients are available:

● syslog: sends the messages to the Syslog server

● trap: sends the messages as SNMP trap to a configured recipient

● email: sends the messages as e-mail

Entry in the logbook

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Range of values / note

max. 150 characters

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents