Ip, Tcp/Ip, Icmp, Snmp Menu Command; 6.8.10 Signal Recorder Menu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.8.9 IP , TCP/IP, ICMP, SNMP Menu Command
Informatio n on Protocols
The pages of this menu show info
protocols in the form of tables.
There are no CLI comm

6.8.10 Signal Recorder Menu Command

Note
The signal recorder is available only in client mode.
Signal Strength Indicators
The Signal Recorder can record or display the signal strength of the connected
access point. Using this data, you can locate areas with an inadequate signal
strength. The Signal Recorder can be particularly advantageous when the client
moves along a fixed path (for example suspension track).
Using the URL
http://<IP address>/Signal.txt
or the URL
http://<IP address>/Signal.log
you can download the generated Signal file. If you are not yet logged in, this opens
the login window in which you must log in with the Admin login.
Displaying the Instantaneous Value
The upper half of the window contains an instrument for displaying the graphic
representation of the currently calculated dBm value in real time. Depending on
your browser and the network load, the display is updated approximately every 500
ms. Apart from the graphic display, the current dBm value is also displayed in plain
language. The MAC address of the AP with which the ECM is currently connected
along with the frequency, channel and transmission rate are also displayed and
updated. You can start or stop the graphic display with the "Start display" and
"Stop display" buttons.
Note
Working with the graphic display can cause a not insignificant network load that
can disturb time- and throughput-critical processes (iPCF, PNIO).
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
rmation on the IP, TCP, UDP, ICMP, and SNMP
ands for this menu command.
242