Siemens SCALANCE W770 Series Configuration Manuals page 83

File type
Script
StartupInfo
Users
WBMFav
WLANAuth‐
log
WLANCert
(in client
mode only)
WLANServ‐
Cert
(in client
mode only)
WLANSi‐
gRec
(in client
mode only)
WLANSpec‐
trumAnalyz‐
er
(Only in ac‐
cess point
mode)
Table 4-2
File type
Config
ConfigPack
CountryList
Debug
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
CLI script file
Startup log file
File with user names and passwords
File with favorites
File with entries from the WLAN Authentication Log
(information on successful or failed authentication
attempts)
User certificate. You can specify a password for the
user certificate on the WBM page "Load&Save >
Password".
Maximum file size: 8192 bits
Server certificate
Maximum file size: 8192 bits
The zip file contains the following:
● csv file with the measured values of the signal
recorder
● pdf file with the measured values and an
additional graphic representation of the
measured values.
You will find information about the measured values
and their graphic representation in the section "Sig‐
nal recorder".
The Zip file contains a csv file with the measured
values of the spectrum analyzer.
You will find information about the measured values
and their graphic representation in the section "Spec‐
trum analyzer".
TFTP/SFTP
Description
Start configuration
Detailed configuration information. for example, start
configuration, users, certificates, firmware of the de‐
vice (if saved as well).
For more detailed information on creating and using
the ConfigPack incl. firmware, refer to the section
"Maintenance".
The zip file contains the country list as a csv and as a
pdf file.
This file contains information for Siemens Support.
Configuration
4.2 Load and Save
Down‐ Save Delete
load
X --
-- X
X X
X X
-- X
X X
X X
-- X
-- X
Save Down‐
load
X
X
X
X
--
--
--
X
--
X
X
X
X
X
X
--
--
83