Siemens SCALANCE W770 Series Configuration Manuals page 43

show history
Description
This command shows the last 14 commands you entered.
The commands are listed in the order in which they were called up. The show history
command is listed as the last command to be entered.
The list depends on the mode. In the Global configuration mode, the last 14 commands entered
in this mode are displayed. These commands are not included in the list of the Interface
configuration mode.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show history
Result
The list of used commands is displayed.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
2.7 General CLI commands
43