Siemens SCALANCE W770 Series Configuration Manuals page 482

Security and authentication
11.1 User rights management
associated role. If the corresponding group is known on the device, both tables are evaluated.
The user is assigned the role with the higher rights.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
user-account-ext <user-name-ext> role <user-role-ext> [description
<user-ext-description>]
The parameters have the following meaning:
Parameter
user-account-
ext
user-name-ext
role
user-role-ext
description
user-ext-
description
Result
A link in the table "External User Accounts" has been created.
Note
User name cannot be changed
After creating a user, the user name can no longer be modified. If a user name needs to be
changed, the user must be deleted and a new user created.
Further notes
You delete a link with the no user-account-ext command.
482
Description
Keyword for a user in the table "Ex‐
ternal User Accounts"
User name
Keyword for the role name
Role name
Keyword for the description
Content of the description
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Range of values / note
-
Enter the name for the user. The name
must meet the following conditions:
● It must be unique.
● It must be between 1 and 250
characters long.
-
Enter a role.
You can choose between system-defined
and self-defined roles.
-
Enter a description for the user in the table
"External User Accounts". The description
text can be up to 100 characters long.
Configuration Manual, 09/2017, C79000-G8976-C324-08