Wlan Allowed Channels Only; No Wlan Allowed Channels Only - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network structures

wlan allowed channels only

With this command, you enable the "Use allowed channels only" function. Only the

channels you specified with the wlan allowed channels list command are used.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call the command without parameter assignment:

wlan allowed channels only

The function is enabled.

Further notes

You display the setting with the show wlan allowed channels <wlan 0/X>command.

You disable the function with the no wlan allowed channels only command.

With this command, you disable the "Use allowed channels only" function. This is the

default setting.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents