Whoami; The "Show" Commands - Siemens SCALANCE W770 Series Configuration Manuals

Security and authentication
11.1 User rights management
Result
The password is changed.
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.
Further notes
You create a user with the user-account command.
You delete a user with the no user-account command.
You show the created users with the show user-accounts command.
You configure the password policy with the password-policy command.
11.1.2

whoami

Description
This command shows the user name of the logged in user.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
whoami
Result
The user name of the logged in user is displayed.
11.1.3

The "show" commands

This section describes commands with which you display various settings.
472
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08