Show Power-Line-State; Show Rmon - Siemens SCALANCE W770 Series Configuration Manuals

Diagnostics
12.1 Diagnostics
Result
The content of the logbook is displayed.
12.1.1.8

show power-line-state

Description
This command shows the status of the power supply.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show power-line-state
Result
The status of the power supply is displayed.
12.1.1.9

show rmon

Description
This command shows the counter reading.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show rmon [statistics [<stats-index (1-65535)>]]
586
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08