Time Dst Date - Siemens SCALANCE W770 Series Configuration Manuals

System time
6.1 System time setting
Result
The system time is set.
Further notes
You display the settings for the system clock with the show time command.
6.1.2.3

time dst date

Description
With this command, you configure the start and end of daylight saving time.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
time dst date <name(16)> <year (1900-2099)> begin <MMDDhh> end
<MMDDhh>
The parameters have the following meaning:
Parameter
name
year
begin
MMDDhh
end
MMDDhh
170
Description
Name of the entry
Year
Keyword for the start of daylight saving
time.
Time for the start of daylight saving time. Time in the format
Keyword for the end of daylight saving
time.
Time for the end of daylight saving time. Time in the format
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Range of values / note
maximum 16 characters
1900 ... 2099
-
MM Month
DD Day
hh Hour
-
MM Month
DD Day
hh Hour
Configuration Manual, 09/2017, C79000-G8976-C324-08