Introduction; Information On The Configuration Manual - Siemens SCALANCE W770 Series Configuration Manuals

Introduction

1.1

Information on the Configuration Manual

Validity of the configuration manual
This Configuration Manual covers the following products:
● SCALANCE W774-1 RJ-45
● SCALANCE W774-1 M12 EEC
● SCALANCE W734-1 RJ-45
● SCALANCE W778‑1 M12
● SCALANCE W778-1 M12 EEC
● SCALANCE W738-1 M12
This Configuration Manual applies to the following software version:
● SCALANCE W700 firmware as of version V 6.2
Purpose of the Configuration Manual
This Configuration Manual contains the CLI commands that are supported by SCALANCE
W700 devices.
Orientation in the documentation
Apart from the Configuration Manual you are currently reading, the following documentation
is also available from SIMATIC NET on the topic of Industrial Wireless LANs:
● Configuration Manual: SCALANCE W770 / W730 Web Based Management
This Configuration Manual is intended to provide you with the information you require to
commission and operate SCALANCE W700 devices correctly. It explains how to configure
the SCALANCE W700 devices and how to integrate SCALANCE W700 devices in a WLAN
network.
● Performance data 802.11 abgn SCALANCE W770/W730
This document contains information about the frequency, modulation, transmit power and
receiver sensitivity.
● SCALANCE W774-1/W734-1 Operating Instructions
This document contains information on installing and connecting up the following products
and their approvals.
– SCALANCE W734-1 RJ-45
– SCALANCE W774-1 RJ-45
– SCALANCE W774-1 M12 EEC
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
1
19