Wlan Ampdu Bytes-Limit; Wlan Ampdu Frames-Limit - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network structures

wlan ampdu bytes-limit

With this command, you specify the maximum size of the AMPDU data packet in bytes.

This command is available only in access point mode.

● The IEEE 802.11n transmission standard is enabled.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call up the command with the following parameters:

wlan ampdu bytes-limit <bytes(1024-65535)>

The parameter has the following meaning:

The size for the AMPDU data packets is specified.

Further notes

You display the setting with the show wlan advanced-11n <wlan 0/X> command.

With this command, you specify the number of individual data packets (frames) grouped

together in one AMPDU data packet.

Size of the AMPDU data packet in bytes 1024 to 65535 bytes

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Range of values / note

Default: 50000 bytes

Show Quick Links

Table of Contents