Show Spanning-Tree Interface - Siemens SCALANCE W770 Series Configuration Manuals

Network structures
7.3 Spanning Tree
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show spanning-tree detail
Result
The detailed settings for the spanning tree function are displayed.
7.3.1.5

show spanning-tree interface

Description
This command shows the settings of the ports for the spanning tree function.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show spanning-tree interface <interface-type><interface-id>
The parameters have the following meaning:
Parameter
interface-type
interface-id
cost
priority
portfast
304
[{cost|priority|portfast|rootcost|restricted-role|
restricted-tcn|state|stats|detail}]
Description
Type or speed of the interface
Module no. and port no. of the interface
Shows the port costs used to calculate
the lowest-cost path.
Shows the priority of the port.
Shows whether spanning-tree
portfast is enabled.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Range of values / note
Enter a valid interface.
-
-
-