Siemens SCALANCE W770 Series Configuration Manuals page 257

Syntax
Call up the command with the following parameters:
wlan mode { show-modes | [2.4 | 5] <mode>}
The parameter has the following meaning:
Parameters
show-
modes
2.4
5
mode
Depending on the current configuration, some settings are not possible. In this case, a
message to this effect is displayed.
Result
The transmission standard is specified.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Lists the transmission standards. --
Optional. You can use the param‐
eter in conjunction with "auto"
and "n". This only takes into ac‐
count the transmission stand‐
ards for 2.4 GHz.
Use the parameter if the client
operates in dual-frequency
mode.
Optional. You can use the param‐
eter in conjunction with "auto"
and "n". This only takes into ac‐
count the transmission stand‐
ards for 5 GHz.
Use the parameter if the client
operates in dual-frequency
mode.
Value corresponding to a specific
transmission standard.
Range of values / note
--
--
● auto
The transmission standard is detected
automatically.
● a
IEEE 802.11a (5 GHz)
● g
IEEE 802.11g (2.4 GHz)
Is downwards compatible with IEEE 802.11b
● n
IEEE 802.11n (2.4 GHz + 5 GHz)
Is downwards compatible with IEEE 802.11a and
IEEE 802.11g
● n-only
IEEE 802.11n (2.4 GHz + 5 GHz)
Is not downwards compatible with IEEE 802.11a
and IEEE 802.11g
Network structures
7.1 WLAN
257