System Contact; System Location - Siemens SCALANCE W770 Series Configuration Manuals

4.1.10.10

system contact

Description
With this command, you enter contact information for the system.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
system contact <contact info>
The parameter has the following meaning:
Parameter
contact info
Result
The contact information is created in the system.
4.1.10.11

system location

Description
With this command, you enter the location information for the system.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
system location <location name>
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Input box for contact information
Configuration
4.1 System
Range of values / note
max. 255 characters
73