Siemens SCALANCE W770 Series Configuration Manuals page 526

Security and authentication
11.3 WLAN
Requirement
You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows:
cli (config-if-vapX-0-Y)#
Syntax
Call up the command with the following parameters:
vap security authentication { show-methods | <method> }
The parameters have the following meaning:
Parameter
show-
methods
method
Result
The type of authentication is specified.
Further notes
You display the settings with the show wlan security <vapX 0/Y> command.
526
Description
Lists the available types of
authentication
Value corresponding to an
authentication method.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Range of values / note
● open-system
Without authentication. Encryption with a fixed
(unchanging) key can be selected as an option. To
enable the key, use the "vap security
encryption" command.
● shared-key
A fixed key is stored for authentication.
● wpa (Radius)
WPA authentication.
● wpa-psk
WPA authentication without RADIUS server.
● wpa2 (Radius)
WPA2 authentication.
● wpa2-psk
WPA2 authentication without RADIUS server.
● wpa-wpa2-auto (Radius)
WPA and WPA2 authentication
● wpa-wpa2-auto-psk
WPA and WPA2 authentication without a RADIUS
server
Configuration Manual, 09/2017, C79000-G8976-C324-08