Diagnostics; The "Show" Commands; Show Authlog - Siemens SCALANCE W770 Series Configuration Manuals

Diagnostics

The monitoring of the system and error diagnostics are handled in different ways:
● Events and faults handling:
Predefined events generate a message. These messages can be distributed in different
ways:
– Entry in the local log
– Transfer to the Syslog server
– Sending as e-mail
– Sending as SNMP trap
● Syslog:
Configures the transfer to the Syslog server
● Port mirroring:
Mirroring of ports to analyze the data stream without disturbing operation
12.1 Diagnostics
In events and faults handling, you set the events whose messages will be distributed in one
of the available ways.
You configure the monitoring of certain system events and power supply and physical
interfaces in the Events configuration mode.
12.1.1

The "show" commands

This section describes commands with which you display various settings.
12.1.1.1

show authlog

Description
With this command, you show the information about successful or failed authentication
attempts.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
12
581