Wlan Ipcf-Mc Roaming-Filter (Client) - Siemens SCALANCE W770 Series Configuration Manuals

The parameter has the following meaning:
Parameter
num-of-cycles
Result
The time is set.
Further notes
You display the setting with the show wlan ipcf-mc command.
5.6.2.6

wlan ipcf-mc roaming-filter (client)

Note
The command is only available if the SCALANCE W700 device supports iPFC-MC or the
function can be enabled.
● iPCF-MC is enabled with the aid of the following KEY-PLUGs:
– W780 iFeatures (MLFB 6GK5 907-8PA00)
– W740 iFeatures (MLFB 6GK5 907-4PA00)
Description
With this command you specify the number of RSSI single measurements from which the
median is determined.
Requirement
You are in the WLAN configuration mode.
The command prompt is as follows:
cli(config-wlan)#
Syntax
Call up the command with the following parameters:
wlan ipcf-mc roaming-filter <5-15>
The parameter has the following meaning:
Parameter
-
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Duration
Description
Number of measure‐
ments
Functions specific to SCALANCE
Range of values / note
1 ... 10
Range of values / note
5 ... 15
5.6 iPCF-MC
145