Siemens SCALANCE W770 Series Configuration Manuals page 84

Configuration
4.2 Load and Save
File type
EDS
Firmware
GSDML
HTTPS Cert
LogFile
MIB
RunningCLI
Script
StartupInfo
Users
WBMFav
WLANAuthlog
WLANCert
(in client mode only)
WLANServerCert
(in client mode only)
WLANSigRec
(in client mode only)
WLANSpectrumA‐
nalyzer
(Only in access
point mode)
See also
Signal recorder (Page 116)
Spectrum analyzer (Page 155)
84
Description
Electronic Data Sheet (EDS)
Electronic data sheets for describing devices in the
EtherNet/IP mode
Loading firmware updates
Information on the device properties (PROFINET)
HTTPS certificate
Maximum file size: 8192 bits
File with entries from the event log table
Private MSPS MIB file "Scalance_w_msps.mib"
This file contains an overview of the current configura‐
tion in the form of CLI commands. You can download
the text file. The file is not intended to be uploaded
again unchanged.
CLI script file
Startup log file
File with user names and passwords
File with favorites
File with entries from the WLAN Authentication Log (in‐
formation on successful or failed authentication at‐
tempts)
User certificate. You can specify a password for the
user certificate on the WBM page "Load&Save > Pass‐
word".
Maximum file size: 8192 bits
Server certificate
Maximum file size: 8192 bits
The zip file contains the following:
● csv file with the measured values of the signal
recorder
● pdf file with the measured values and an additional
graphic representation of the measured values.
You will find information about the measured values
and their graphic representation in the section "Signal
recorder".
The Zip file contains a csv file with the measured values
of the spectrum analyzer.
You will find information about the measured values
and their graphic representation in the section "Spec‐
trum analyzer".
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Save Down‐
load
X --
X X
X --
X X
X --
X --
X --
-- X
X --
X X
X X
X --
X X
X X
X --
X --