No Vap Broadcast Ssid (Access Point) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

no vap broadcast ssid (access point)

With this command, you disable the "Broadcast SSID" function. The SSID is no longer sent in

the frame of the access point. This means that the SSID is not visible for other SCALANCE

W700 devices. Only stations that know the SSID of the access point and that are configured

with it can connect to the access point. The "Any SSID" option must be disabled on these

This command is available only in access point mode.

You are in the Interface Configuration mode of the VAP interface.

The command prompt is as follows:

cli (config-if-vapX-0-Y)#

Call the command without parameter assignment:

no vap broadcast ssid

The function is disabled.

Further notes

You display the setting with the show wlan vap <vap X 0/Y>command.

You enable the function with the vap broadcast ssid command (default setting).

Table of Contents